UEFI ONLY MEDIA LEGACY BOOT BIOS when booting from a USB flash drive – how to fix the error?
When booting your computer or laptop from a bootable flash drive made with the Rufus software, an ERROR: BIOS/LEGACY BOOT OF UEFI-ONLY MEDIA message may appear with an explanation of the error in English and a suggestion to press any key to reboot .
This manual details what may be causing the error, how to fix the BIOS LEGACY BOOT OF UEFI ONLY MEDIA error, and successfully boot from the flash drive.
The cause of the BIOS LEGACY BOOT OF UEFI ONLY MEDIA error
Most modern PCs and laptops support two boot modes: UEFI (EFI) and Legacy (CSM, BIOS, Compatibility Support Mode). When writing a bootable flash drive in Rufus, the user selects in which mode it should be written; the default (if nothing is selected) is UEFI mode.
In case you boot from such a flash drive in Legacy mode, you will see the message ERROR: BIOS/LEGACY BOOT OF UEFI-ONLY MEDIA, and the explanation on the error screen suggests changing the boot mode in the BIOS/UEFI setup of your computer, or rewrite the flash drive for another boot mode.
Keep in mind: even if you have enabled UEFI boot support in your computer’s BIOS, it is possible that Legacy mode will be used by default (if it is also enabled), which will also cause the error in question. One additional point: For bootable drives created with Rufus, in addition to the steps below, you may need to disable Secure Boot in BIOS/UEFI.
Boot from a flash drive in UEFI mode
The easiest and fastest solution in our case is to boot from a flash drive in the desired mode. This will work for any computer with UEFI mode support (this boot mode is supported by most newer devices from around 2012).
How to do it? – There are two options:
Creating a Bootable Rufus Flash Drive for Legacy BIOS Mode
If for some reason the above solution is not suitable for you, you can recreate a bootable flash drive in the same Rufus program so that it is ready for Legacy Mode (CSM).
To do this, simply select MBR under “Partition Scheme” and “BIOS (or UEFI-CSM)” under “Target System”, this item will be selected automatically. After writing the USB drive in this mode, it will not cause ERROR: BIOS/LEGACY BOOT OF UEFI-ONLY MEDIA error when booting with the same boot parameters in BIOS that you initially used.
Video-tutorial
If there are still doubts or something is not entirely clear, ask in the comments, I will try to help.
In case this is also interesting: