Categories
Ξ TREND

Recipe for Beef Brisket Roasted with Beer, Orange and Star Anise | world news

world news

Brisket is such a great cut of meat to cook with. Not only does it have a deep, rich flavor, but also a nice amount of fat, which keeps it moist during the long cooking it needs to become tender. To help it further, I roast the joint, which means it’s partially covered in liquid for most of the cooking, and that liquid makes a breathtaking sauce.

Do not throw away cooked vegetables with the brisket. They are full of flavor and deliciously soft when cooked. If you don’t like mushy vegetables, blend them with 2 tablespoons of cold-pressed canola oil to make a silky puree to serve with the beef. This method also works wonderfully with pork shoulder: simply replace the beer with cider.

Schedules

Preparation time: 20 minutes, plus 1 hour for the meat to come to room temperature

Cooking time: 4 hours 15 minutes

Serves

6-8

Ingredients

  • 1 piece of boneless and rolled breast (1.5-2kg)
  • 4 tablespoons light sunflower or rapeseed oil
  • 2 onions, cut into quarters
  • 3 carrots cut into 5 cm pieces
  • 3 stalks of celery cut into 5 cm pieces
  • 8 chestnut mushrooms, cut in half
  • 4 cloves of garlic, crushed
  • 2 oranges, quartered
  • Anise 4 stars
  • ½ cinnamon stick
  • 750 ml of light beer, type IPA
  • 3 tablespoons tamari (or soy sauce)
  • 4 bay leaves
  • 2 sprigs of thyme

Method

  1. Remove the meat from the refrigerator at least an hour before cooking to bring it to room temperature.
  2. Preheat the oven to 230°C/220°C fan/gas mark 8. Place a deep casserole dish (large enough to hold the breast and vegetables) and heat it for 10 minutes.
  3. Season the brisket all over. Take the hot casserole dish out of the oven and add the oil. Carefully lower the beef into the casserole dish (the oil will spit) and turn it over to coat the meat well with oil.
  4. Return the casserole dish to the oven and cook for 10 minutes, then take it out and give the breast a quarter turn. Return to the oven and repeat every 10 minutes until the breast is a dark brown color on all sides.
  5. Take out the casserole and add the onions, carrots, celery, mushrooms and garlic. Return to the oven and cook for 20 minutes, stirring halfway through cooking, until the vegetables have taken on a little color.
  6. Take out the casserole dish again and lower the oven to 160°C/150°C fan/thermostat 3. Add the oranges, star anise, cinnamon, beer, tamari (or soya), bay leaves and the sprigs of thyme in the casserole dish.
  7. If necessary, top off with a little extra beer or water to ensure the brisket is at least two-thirds submerged in the liquid. Place the lid on the casserole dish.
  8. Bake for 2.5 to 3 hours until the breast is juicy and tender, checking from time to time during cooking that the liquor has not reduced too much and adding a little water if necessary. At the end of cooking, you should have around 5 cm of liquor in the casserole dish.
  9. Remove the beef from the pot and place it on a heated carving plate and set aside. Remove and discard the star anise, cinnamon, bay leaves and thyme sprigs from the liqueur. Squeeze the juice from the oranges with the back of a spoon, then remove and discard the skin. Taste the liquor and season accordingly, with salt and pepper.
  10. Remove the string from the brisket and cut the beef into slices. Serve with roasted vegetables and a ladle of cooking juices.

A note on the sauce

I don’t mind the liqueur being broth-like as long as it’s flavorful, but if you prefer a thicker sauce, simply pour some (or all) of the liqueur into a saucepan and bring to a boil. Meanwhile, mix 1 tablespoon of cornstarch with a little cold water to make a smooth paste. Once the liquor is boiling, gradually add the cornstarch mixture until you obtain the desired consistency.

Recipe for River Cottage Great Roasts, by Gelf Alderson, published by Bloomsbury (£20)

telegraph Uk

Categories
Ξ TREND

Orange Spain suffers a possible hack that leaves its users without Internet. The company is already working on the solution


If you are an Orange customer in Spain and you are having problems, it is not a matter of your installation. And in recent hours, numerous incidents have been reported among the operator’s clients, leaving many of them without Internet access. And if the suspicions are right, it doesn’t seem like an easy problem to solve.

And, as Broadband points out, Orange would have suffered an attack. Specifically, Orange’s RIPE NCC account would have been hijacked and, hence, the Internet access problems.

What is happening with Orange Spain

The acronym RIPE NCC corresponds to Réseau IP Européens Network Coordination Center and it is a vital organization for the management of IP addresses and, wow, the coordination of Internet infrastructure in Europe, the Middle East and part of Central Asia.

Although there are many operators, they are not the ones that directly control the Internet and it is organizations like RIPE NCC that manage users around the planet. There are only five of these organizations, to give you an idea of ​​their magnitude.

That being said, a user named Ms_Snow_OwO has claimed responsibility for the attack on the Orange account and its kidnapping. She has done it in X with a message that is accompanied by a few screenshots.

Almost making fun of Orange Spainthe alleged hacker has commented that he has “fixed” the company’s RIPE security administrator account and that, if they want the new access credentials, they can send him a message.

This was hours before Down Detector indicated the fall of the Orange network in Spain and users began to express their anger with the whole matter.

Orange has not issued any statement throughout the afternoon, limiting itself to responding to some users who were complaining about X, but at 6:59 p.m. Spanish time, the account shared the following publication:

This is a message set to alert users and They affirm that service will be restored shortly for all customers. From SamaGame, we have contacted the company and we will update as soon as we have more information.

Categories
Ξ TREND

Orange customers in Spain are being left without Internet access due to a possible hack


Something is happening with Orange, one of the large operators in Spain. Since the early afternoon of January 3, many of its users have reported problems with their connectivity on peninsular Spanish time) and were fired shortly after.

The reason, far from being a temporary drop in service, as happens from time to time with almost any operator, seems more serious. As published by the specialized website, This is an attack: someone has hijacked Orange’s RIPE NCC accountwhich is seriously affecting its operations and leaving its clients without Internet access.

Restoring service would not be immediate

RIPE NCC (Réseau IP Européens Network Coordination Centre), is a fundamental organization for the management of IP addresses and the coordination of internet infrastructure in Europe, the Middle East and parts of Central Asia. There are only five organizations in the world that are dedicated to this, and they are distributed to users from all over the planet by geographical areas.

The alleged attacker, identified as Ms_Snow_OwO in X, has claimed responsibility for the hijacking of the Orange account and published screenshots as evidence. She did it in the early hours of Tuesday to Wednesday, many hours before the connectivity incidents began.

Imaven: Down Detector.

The attacker would be altering the data

Such an incident, if confirmed, not only disrupts connectivity, but It also exposes the vulnerability of information systems and networks.because in addition to leaving customers without service, it endangers the security of their data.

Orange, for its part, has not published an official statement yet… but it has responded to a very angry user’s complaint by admitting a problem, without specifying which one, and explaining that “it is already working to solve it as soon as possible.” He has assured other irate clients that they hope to achieve this “in the course of the next few hours.”

We have contacted Orange to find out their version and we will update this article as soon as we receive a response.

Categories
Ξ TREND

How to check if you have fiber coverage with Movistar, Vodafone, Orange, MasMóvil and the rest of the operators


If you are thinking of changing operator or hiring fiber in a new home, in addition to knowing what the best rates are, it is always necessary to know if you are going to be able to enjoy them. Therefore, we are going to explain how to check if you have fiber coverage with the main operators in the market.

We are going to start by telling you in detail how to do this check with Movistar, Vodafone, Orange, MasMóvil and Jazztel. And then we’ll leave you a list of the pages to consult in these and the rest of the operators to make the pertinent checks.

How to know if you have coverage with Movistar

To check your fiber coverage with Movistar, you have to enter the website movistar.es/coberturas. In it, you have to write the information of the address where you live to make a check, adding your email and phone. Once you fill them in, click on the Check button.

The first time you check, you may go to a second page where you have to specify the block and floor where you live and press OK to refine the search. When you do it, Movistar will confirm if you have coverage and it will provide you with a link to consult the fiber and fusion rates. In its rates, Movistar offers up to 600 Mb of fiber.

How to know if you have coverage with Vodafone

To check your fiber coverage with Vodafone, you have to go to the website vodafone.es/c/tienda-online/particulares/consulta-de-cobertura. In it you have to write the address where you live, seeing how while you are writing the web gives you suggestions. The good thing is that you will not need to give your phone number or email To check, just type the address and click Continue.

And that’s it. The web will check and Vodafone will confirm if you have coverage. In addition, on the same page where it tells you if you have it, it will also show you the main offers and rates that you have available, both for mobile and fiber as well as fiber only.

How to know if you have coverage with Orange

To check your fiber coverage with Orange, you have to go to the website orange.es/cobertura. In it, you have to write the information of the address where you live to make a check, adding your email and phone. Once you fill them in, click on the Check coverage button.

The first time you check, you may go to a second page where you have to specify the block and floor where you live to refine your search. When you do it, Orange will confirm if you have coverage and it will provide you with a link to consult the fiber and fusion rates. In its rates, it offers up to 600 Mb of fiber.

How to know if you have coverage with Jazztel

To check your fiber coverage with Jazztel, you have to go to the website jazztel.com/consulta-de-cobertura.html. In it, you have to write the information of the address where you live to make a check, adding your email and phone. Once you fill them in, click on the Check button. The address and population data will fill in as you type, and you will have to select them from the list of results.

And that’s it. The web will check and Jazztel will confirm if you have coverage. In addition, on the same page where it tells you if you have it, it will also show you the main offers and rates that you have available, both for mobile and fiber as well as fiber only.

How to know if you have coverage with MasMovil

To check your fiber coverage with MasMóvil, you have to enter the web masmovil.es/cobertura-fibra-optica. In it, you have to write the information of the address where you live to make a check, adding your email and phone. Once you fill them in, click on the Check coverage button. The address and population data will be completed as you type, and you will have to select them from the list of results. The results will tell you if you have coverage and the offers available.

Check the coverage with the other operators

As you have seen if you have been reading this far, the ways to proceed are practically the same for all operators. Therefore, after specifying the processes of five of the main ones, below we tell you the pages to check the coverage with the rest of the operators that are available. Here you have it