bales – SamaGamer

Anyone who has already mowed one or two grasses or made hay and straw in Farming Simulator 22 will probably have often picked it up with a collection or loading wagon and then transported it to the destination. Similar to its predecessors, you can also press bales in the new LS22 and wrap them with a bale wrapper. In addition to square bales, large round bales can also be produced. In this context, the question often arises not only of how to press the bales, but also how to unload the bales.

Farming Simulator 22: How to unload unfinished bales?

If you use the baler, you can see the grass, hay or straw required to produce a bale at the bottom right of the screen. As soon as the progress bar reaches 100 percent, you should be able to see the bale at the back of the baler. To unload the finished bale, you must first switch off the baler and then unload the bale using the Z button. But what do you do with the unfinished bales? Can you empty the baler completely and also unload the unfinished bale with 50 percent?

The short answer is, no, unfortunately it doesn’t work that easily (at least not without mods). There were various mods for the LS19 with which you could still unload the “Unfinished Bales”, unfortunately we have not yet been able to find the mod for the LS22. However, you can use various “tricks” to remove the unfinished bale. If the half-finished bale is made of grass and you now want to use it to make straw bales, you can simply collect the straw and after a certain amount the grass turns into straw (so you don’t end up with half grass and half straw bale). On the other hand, you can also reset the tractor with the baler via the map as in the last part and then empty the baler.

Tip: This is how you can make silage in Farming Simulator 22.

Is the number of bales limited again in the LS22? At how many bales do you get the “Too many bales” message and how can you cancel or increase the bale limit? This may be the question asked by one or other gamer who recently bought the new LS part for the PC or the console (PS4, PS5, Xbox One). Anyone who has already wrapped a lot of bales in the previous version may still be familiar with the bale limit of 200 bales. But are these still available in the Ls22 and how many bales can you press?

Farming Simulator 22: How many bales can you press?

Yes, the bale limit still exists in Farming Simulator 22. We were able to do so in our test Produce/press a total of 200 bales and after that it became “Too many bales” message appears. According to our information so far, the limit cannot be increased or completely removed on both the PC and the console. But what you can also do in the LS22 (as in LS19) is buy more bales from the dealer around the corner. So if you have pressed 200 bales and for whatever reason you still need more bales, you can simply buy the other square or round bales from the dealer. Unlike the self-pressed bales, there appears to be no limit to the purchased bales and this applies to both the PC and console versions.

Is there now a way to remove the bale limit in the LS22 by changing a configuration file or installing a mod? If you already know more about this, please feel free to post it here in the comments section. If we find a possibility, we will of course add it here.

By the way, the first autoload mods are now available for transporting bales, similar to pallets. An autoload trailer can be used to load and unload the bales automatically, which can save a lot of time depending on the number of bales.