Categories
Ξ TREND

Tutorial : How to Farm Coal in Nightingale


Surviving in the more aggressive realms of Nightingale can be a daunting task if you don’t have enough resources available. Coal is one of many materials that can be found scattered across regions, and can also be easily found in certain areas.

Where to find coal in Nightingale

Coal is usually found inside Kingdom cavess. While not all realms have caves, there’s a good chance you’ll find Coal inside if you pass through one. Just like other gems and general ores, they can be found in special mining rocks that differ from others. Coal stones are usually brown, with a pointed pattern like regular rocks.

Caves are usually home to some sulfur, which is more similar to other gemstones like quartz and sapphire and has a yellow color. Mining points for these are usually right next to coal locations, so you can make your life easier by grabbing both resources at once. There will eventually be situations where you need it, so it’s better to be safe than sorry.

Coal can also spawn randomly in Desert and Swamp realms, even outside of caves. Although this is less likely to happen, don’t miss the rare opportunities when this happens and seize them as usual. You’ll probably still need to head to caves later if you’re looking for extras, especially since going to higher level realms won’t let you get extra resources by harvesting them. You get increased gas rates, but you only get the same amount of coal from a beginner realm and an advanced realm.

Read also : Complete guide to Super Mario Bros Wonder: Bulrush Express

But of course, it may take a while before you can start heading towards those larger realms that lie beyond the Antiquary, so you won’t see any coal this early in the game. And if your construction using coal is destroyed in some way, you can repair it instead of rebuilding it again.


Categories
Ξ TREND

TUTORIAL : Best Nightingale Graphics Settings for Performance

If you’re new to Nightingale, you’ll want to adjust your settings to give yourself the best possible performance. Here are the best graphics settings for Nightingale performance.

The best settings to play Nightingale at high FPS

Before we begin, it’s worth noting that these settings will be entirely geared towards getting the highest FPS possible. This means that the game is likely to look significantly worse visually after applying all of these settings. This should be used as a baseline, through which you can increase the quality until you achieve a good balance between visuals and performance. With that being said, let’s get started:

To show

Image via blog.

  • Full screen mode: Windowed, Borderless, or Windowed (depending on preference)
  • Resolution: 1920×1080 (or higher depending on screen quality)
  • Activate Arachnophobia mode: Of
  • Enable motion blur: Of
  • Enable third person view (experimental): Of
  • Enable camera shake: Of
  • Field of view (FOV): 70
  • Third-person field of view: Never mind
  • Brightness: Based on preference

Graphics

Image via blog.

  • Quality preset: Performance
  • Lumen – GI: Performance
  • Antialiasing: Performance
  • Effects: Performance
  • Foliage: Performance
  • Post treatment : Performance
  • Shady: Performance
  • Shadow: Performance
  • Textures: Performance
  • View distance: Performance
  • Enable vertical sync: Of
  • Frame rate limit: 60
  • Nvidia Reflex Low Latency: On
  • Performance improvement : Choose based on GPU manufacturer
  • DLSS/TSR/XeSS quality: Ultra Performance

Read also : How to become a nurse in BitLife

What other settings can you change to increase the frames per second?

While the settings above should significantly increase your frame rate, there are a few other settings you can tweak outside of Nightingale to improve performance. For example Closing all external applications can help your PC focus on Nightingale itself. You can also enable game mode in Windows (available in your PC settings). Finally, you can right-click Nightingale in your PC’s Task Manager and set its priority to High. Not all of these will give that much of a boost, but they will help.

If you’re looking for more information once you start playing, check out our guide on how to use Push to Talk in Nightingale.

Categories
Ξ TREND

TUTORIAL : Nightingale: How to Fix Twitch Drops Not Working


With Nightingale now available in Early Access, players want to get as much out of this game as possible, and that includes, of course, getting the exclusive Twitch Drops. But if you can’t get them, here’s what you need to do.

How to Fix Twitch Drops Not Working in Nightingale

Players may encounter issues when trying to configure their Twitch account to properly receive loot while watching streams. The most common problem is that the player must open Nightingale at least once before linking their Steam/Epic Games account. While this isn’t usually a requirement for linking accounts in other games, it is the case here and may be one of the reasons why you can’t start getting your drops.

You only need to enter the game once and then complete your character creation just to be safe. Return to the Nightingale account link page and try linking your accounts again to start receiving drops. If you did everything correctly, you should see a page like this:

Screenshot by blog

Here’s what you need to do to get your Nightingale drops, step by step:

  1. Link your Steam/Epic Games account to Nightingale via their official website.
  2. Now link your Twitch account on the same page and then go to Twitch itself
  3. Find any channel streaming Nightingale live and watch it for a few hours.
  4. Rewards must be claimed through your Twitch Loot Inventory.

Read also : How to get the Narrow Minded mod in Warframe

Your current progress can also be checked in your loot inventory. Scroll down until you find Nightingale, open its tab and you can see how many hours you have left before you get your long-awaited rewards.

They’re only available for a few days, so make sure to grab them before they’re gone! It takes a while to finish getting the most important item (the good guy, of course), but having a stream open for a few hours shouldn’t hurt.

Categories
Ξ TREND

TUTORIAL : How to use Push to Talk in Nightingale

If you want to talk with your friends in Nightingale, using voice chat will be integral. Here’s how to use Push to Talk in Nightingale.

How to enable Push to Talk in Nightingale

Image via blog.

Press to talk should be enabled immediately when enabling voice chat. If you haven’t already, you can go to the game settings, navigate to the Audio tab, then scroll down to the Enable Voice Chat feature and enable it. From there, you should see Push to Talk below. If not, simply open the drop-down menu and select Push to Talk.

Can you change your Push to Talk key?

By default There is the Push to Talk button. It also looks like you unfortunately can’t change the key that activates Push to Talk. This issue will likely be fixed as soon as possible after launch, but you’ll have to wait for the first patches before it comes into play. For now, you can still change the volume once you’ve used it. You can also use another chat program like Discord if you’re really unhappy with the in-game chat. It’s not an integral part of the experience, but it’s annoying either way.

If you plan to stick with it and use voice chat, you need to know other options in the Audio menu. In addition to those mentioned above, you can increase your voice to sound like a demon, squeaky, or just like you if you want. You can also adjust the mic volume if you don’t want to explode the eardrums of the people you’re playing with. This may sound hilarious, but I don’t think your friends will agree.

Read also : How to get the bolt cutters in Alan Wake 2

If you need help with your experience, check out our guide to Nightingale file size and game size.

Categories
Ξ TREND

TUTORIAL : How to Fix DirectX 12 is Not Supported Error on Your System in Nightingale

Nightingale can be a fun survival game, but it’s only fun if you can play the game in the first place. Here is how to fix Directx 12 is not supported error on your system in Nightingale.

Nightingale DirectX 12 is not supported on your system patches

There are several reasons why Directx 12 is not supported on your system may appear when you try to play Nightingale. The main causes of this problem and their solutions are:

You are not playing under Windows

If you try to play Nightingale on something that’s not Windows (like on a Mac or via Linux), you may encounter this error. This is because Nightingale is currently not supported on these operating systems. The same goes for running the game on an emulated version of Windows. You will need a Windows PC or console to play the game properly.

You do not meet the minimum specifications of your PC

You may get Directx 12 is not supported error on your system if you don’t do this Meet the minimum game specifications. If you’re not sure what these are, you can find them on the official Nightingale Performance Expectations blog post under Benchmark Expectations. You will need to upgrade your PC if you want to play the game, if you do not reach the Minimum category.

Read also : How to assign Palworld tasks to your base in Palworld

Your version of Windows may be outdated

If you haven’t updated Windows in a while, these Missing updates could prevent the game from launching. According to the developers, you must be on Windows version 1909 or later. Otherwise it won’t launch. To find your version of Windows:

  • Open your search in the taskbar
  • Type Settings and press Enter
  • In the Settings window search bar, type About
  • Click “About your PC”
  • Under Windows Specifications, make sure you are at version 1909 or 20H2 or higher

You need to update your graphics drivers

If you have not updated your Graphics drivers In a while, this could cause problems for Nightingale trying to get started. To resolve this issue, you need to go to the driver site of your graphics card manufacturer (Nvidia, AMD, or Intel), select your GPU, and then download the latest drivers. You may also have built-in software (i.e. GeForce Experience for Nvidia graphics cards) that can allow you to update drivers directly.

If all of the above options fail, you will want to contact the game’s support team through a ticket. For this issue, make sure to select Technical issue. Hopefully the team will get back to you. Good luck getting into the game! If you need help once you’re inside, check out our guide on how to use Pusk to Talk in Nightingale.

Read also : Super Mario RPG: All Mario’s Special Moves and Effects, Listed