How to activate damage to vehicles in the new F1 23? What does the damage model look like in F1 23 and which parts can fly off the car? The damage model is a big issue for some players in many racing games, especially in simulations. While in some arcade racing games “realistic damage” can occur in crashes and all the cars can fly apart, in games with licensed cars this is rare and apart from minor scratches and minor dents, usually not much happens. It looks similar in the new F1 23, where the damage model has not changed much compared to its predecessor.
Damage model in F1 23
Yes, there is a damage model again in F1 23 and you can activate and deactivate the damage caused by collusion, but apart from damaged front spoilers, broken wheel suspensions, dangling tires and slight deformations, you don’t see much. As is well known, the tires on F1 cars cannot fly off and the car cannot be severely deformed by crashes or even break into two parts, no matter how fast you drive against the wall.
Activate and deactivate damage
The damage can be determined in F1 23 using simulation settings, as usual in its predecessors. In the simulation settings you can, on the one hand, switch collisions on and off under the collision settings, and on the other hand, you can also specify what effects the car damage has under the damage settings. In the realistic Simulation setting, all areas of the car can be damaged, the impact of damage to handling and performance is greater, and tires can be damaged from wear and collisions with barriers and debris.
In F1 23, open the simulation settings before the race.
Enable or disable “collisions” and adjust the effects of car damage.
By the way, the damage settings are deactivated and grayed out during the race. To activate the damage, you must change the setting before the race as described above.
Tip: You can now install mods in the new F1 23 and, for example, add additional paintwork to the game.
After a first look last June, Meta revealed all the details of its new mixed reality glasses some days ago. The Meta Quest 3 is a more ergonomic, lighter, more powerful and, apparently, more capable device than the previous generation.
Now, finally, we know that, at a minimum, we will be able to acquire them in Spain through an operator. As happened with Meta Quest 2, Vodafone has been the first in confirming the arrival of the new Meta Quest 3 to its ‘Vodafone Flex’ program.
You get the game ‘Asgard’s Wrath 2’ for free
Vodafone Spain has confirmed that, from next October 10its customers will be able to purchase the Meta Quest 3. According to Meta, this new Virtual Reality device promises twice the processing power, a 40% thinner optical profile and 30% more resolution than the previous model.
Additionally, it comes with new Touch Plus driverswhich have a ringless design and integrate TruTouch haptic technology to provide physical feedback when interacting with objects.
The new Meta Quest 3 will be included in Vodafone Flex, the exclusive benefits program for Vodafone customers. Thanks to this, all those who purchase this device will be able to access a payment in installments without interest in 24 or 36 months and after-sales service with repair in a maximum of 5 business days and at no cost to the customer.
The Meta device will be available with 128 GB capacity from October 10 at all Vodafone physical and online points of sale. They can be purchased associated with any mobile or convergent rate, and depending on this, the monthly fee will vary. For example, when associating them with any Vodafone unlimited tariff, their price is 16.50 euros per month for 36 months.
In addition, as a launch promotion, all Vodafone customers who purchase the new Meta Quest 3 will receive as a gift the action game in virtual reality ‘Asgard’s Wrath 2’.
If you want to block certain content on your Philips smart TV at certain times, you can easily set up parental controls for this. This has the benefit of allowing your TV to broadcast family-friendly content whenever you allow it. This means that children in a family can also be better protected if, for example, a shared television is used in the living room.
Setting up the protection function on your Philips smart TV can be done in just a few steps. How you do this is explained here in detail.
Philips TV: Set up parental controls
1
First you press the “Menu” button on your remote control.
2
There you should be able to find the “Features” option on your Philips TV screen.
3
The next step is to go to “Child Lock”.
4
You will then be prompted to enter your PIN.
5
Next you select “Lock” (Custom Lock).
6
Here you can then navigate to the right with your remote control to confirm “Lock After”. At this point you can set the exact time yourself, according to which the lock on your Philips Smart TV should be based. You then confirm the time with “OK”.
We not only show you how to set up parental controls on your Philips TV. On SamaGame you will find more helpful instructions for your smart TV. We explain the difference between QLED and OLED or how you can connect your TV to the Internet.
A Quebec swimming pool installer who made headlines by threatening customers who refused to pay huge extras set up a “system to rip off and overcharge” consumers, the Superior Court has just ruled.
• Read also: Ruined by their new swimming pool: money-hungry installers threaten them
Piscines Élégance and its owner, Dominic Flamand, “clearly and voluntarily (…) set up a system of overbilling to enrich themselves,” said judge Carl Lachance in a decision rendered Monday following a civil suit.
The company’s regular subcontractor, Excava Plus, owned by former drug trafficker Patrick Laurendeau, was also part of the “project to dig deeper in order to charge extras to its clients,” added the Court. superior.
The court was studying the case of Simon Comtois, who retained the services of Piscines Élégance, in September 2021, to repair his damaged swimming pool. The work was then estimated at approximately $18,400.
The work took place from October 4 to 13, 2021, following which Piscines Élégance issued an invoice for nearly $145,000, or $80,000 for the excavation.
“The final price is seven times higher than the initial price,” underlines the magistrate.
Searches “not necessary”
Simon Comtois refused to pay this entire invoice. In court, Dominic Flamand demanded $103,000 from his client. Piscines Élégance maintains that its subcontractor had to dig further and fill no less than 37 trucks with contaminated soil during the work. According to him, this is an “unsuspected” extra.
However, “the expertise establishes that the excavation work over an excessive depth and width was unprecedented and unnecessary,” wrote the magistrate.
For comparison, the first swimming pool installer at Mr. Comtois would have dug to a depth of five and a half feet. Piscines Élégance would have had it dug six feet deeper. The excavation was such that a lake was created under the swimming pool and water continually accumulated there, according to an expert witness.
Additionally, the work performed did not resolve the customer’s initial problem. The pool is still sagging and it will take some $22,600 in additional work to correct everything, we can read.
“Tactics” to overload
Patrick Laurendeau, from Excava Plus, supervised the work. The latter was conspicuous by his absence at court.
“Laurendeau did not testify most likely because her version would have been prejudicial, especially since several clients complained to the Régie du logement du Québec about Excava Plus’ tactics to charge extras in similar cases” , writes Judge Lachance.
During the trial, it was mentioned that the RBQ had conducted an investigation into the practices of Excava Plus, meeting with customers of eight sites opened between 2020 and 2022.
“In each case, the facts are similar (…) The searches are too deep and too wide compared to what is requested (…) The extras sometimes represent more than double the offer price,” writes the judge, who recalls that the RBQ has since suspended Excava Plus’ permit.
“Wrongful behavior”
In the court’s opinion, Dominic Flamand’s testimony “is unreliable and its credibility doubtful.” Piscines Élégance should have adequately informed its client about the amount of extras, the opposite constituting “reprehensible and wrongful conduct”.
Dominic Flamand thus “failed in his duty of good faith” and imagined a “system so that his company abuses its customers”, concludes the magistrate. The court thus rejected the $103,000 lawsuit filed by Piscines Élégance and instead ordered the company and its owner to pay more than $42,000 to Simon Comtois.
Remember that the Bureau of Investigation revealed, at the beginning of the year, that Piscines Élégance and Excava Plus had allegedly threatened customers who refused to pay tens of thousands of dollars in extras billed without warning or justification.
Piscines Élégance is currently facing a dozen civil suits, linked to customers who feel cheated. In one case from 2022, the company charged $177,000 more on a $92,000 bill.
The taxman is asking him for nearly $60,000
Debts and worries are piling up for Piscines Élégance, while Revenu Québec is now demanding nearly $60,000 from it.
According to documents obtained by our Investigation Office, Piscines Élégance owes more than $56,000 to the Quebec tax authorities in taxes and some $2,300 in taxes, for the years 2022 and 2023.
In June, our Bureau of Investigation also revealed that the State had taken as guarantee the residence of the owner of Piscines Élégance, Dominic Flamand. The Attorney General of Quebec then demanded more than $14,000 from him for six unpaid tickets in recent years.
Remember that Piscines Élégance made the headlines at the beginning of the year for having given a nightmare to several clients who had retained its services for the installation of their in-ground pool.
The company’s website, Facebook page and premises are closed today. At the end of last March, Dominic Flamand formed a new company specializing in the installation of swimming pools called “Fibre de verre Pro”.
With Philippe Langlois
Do you have any information to share with us about this story?
Write to us at or call us directly at 1 800-63SCOOP.
With the brand new Magic: The Gathering Set Murder at Karlov Manor The most popular trading card game in the world takes us once again into the mysterious city Ravnica. Thanks to Wizards of the Coast, we have the exclusive opportunity to get you there before Release on February 9th to introduce two of the dewy cards.
The Karlov Manor murder is the first permitted in standard format Release of the year 2024. But before things get going in February, we’ll first tell you what to expect with the new MTG set before we take a look at the actual cards.
Magic: The Gathering – With Murder in Karlov Manor you will uncover Ravnica’s darkest conspiracy starting February 9th
In a city that’s drowning in crime, it’s up to you Mystery behind the mysterious murders in Karlov Manor to decipher – before you yourself become the next victim. You delve deep into the mysterious events by making decisive decisions collects evidence and dark figures suspectedto put an end to the gruesome series of murders once and for all. With the “Determine” An older mechanic returns to Magic: The Gathering, which fits perfectly with the Sherlock setting of the set. But also on new mechanicsfor example this “Suspect” or the “Preservation of evidence”you can be happy.
You join the renowned detective Alquist Proft who has been on the trail of the perpetrator for some time. Together with the other investigators working on the case, an exciting game of cat and mouse unfolds in front of you, which requires your eye for revealing details and a particularly sharp mind. You should be careful nowbecause Wizards of the Coast let us two exclusive preview cards from Murder in Karlov Manor before they are released with the rest of the set.
Exclusive map preview: Daredevil Detective and Cornered Crook
Equals two red creatures was sent to us for the presentation: The Daredevil detectivejust like that Cornered crooks. Of course, we take a close look at the two brand new Magic cards:
The Daredevil Detective from the new MTG set Murder in Karlov Manor.
Daredevil Detective comes along for one mana 0/3 into the game and offers you the opportunity every time you attack with it Sacrifice an artifact or discard a card. If you decide to use its effect, you draw a card and the Daredevil Detective receives +2/+0 until the end of the train.
The Cornered Crook from the new MTG set Murder in Karlov Manor.
The Cornered Trickster costs you four mana and offers in addition to its stable body 5/4 also has an effect: If it comes into play, you can Sacrifice artifactto complete a goal of your choice three points of damage to inflict.
What else awaits you with the new Magic: The Gathering set, Murder in Karlov Manor, can be found on the in-house website website. Here you get further information to the cards which booster, decks and Bundles there will be and where you can get the set now pre-order can. You can find a more detailed article on the fresh (and returning) mechanics, the story and the characters here.
Murder at Karlov Manor is released on February 9, 2024 in the physical version, a few days earlier, to be precise February 6thyou can already get the set in the Online branchMagic: The Gathering Arena play.
Last current video: Ikoria Lair of Behemoths Official Trailer
The picture settings of a Grundig television can be easily adjusted to your viewing habits and requirements. Here you should also consider the different types of content you use your Smart TV for. The television environment also plays an important role. We tell you what is important.
Dolby Vision
With Dolby Vision you get radiant colors, which are particularly emphasized in films and series. If your Grundig TV model offers this technology, you will get high color saturation and clear differences between light and dark scenes on your TV screen.
Dolby Vision is played back on your Grundig UHD TV together with High Dynamic Range (HDR), which ensures better picture quality. This presents you with finer details and strong contrasts that let you sink right into the picture.
brightness
You can regulate the brightness in your picture settings in order to be able to see everything on your television screen, even with very dark and very bright film scenes. This allows you to perceive a particularly large number of details and shades. If the brightness is set too bright, however, you will consume significantly more power and the picture can appear too bright.
contrast
The contrast values also help you to cover as many areas as possible on your smart TV screen. Dark shades in particular can be brightened in this way. This increases the viewing pleasure during a film, for example, so that you can also see all the details of the picture.
color saturation
With increased color saturation, the colors on your TV screen become particularly strong and radiant. However, you should not set this function too high, otherwise the color areas will look unnatural and the contours will appear too bright.
Adjust picture settings
1
To get to your picture settings, first click on the white gear wheel in the top right corner of your television screen.
2
Then you go to the device settings in the displayed list almost at the bottom.
3
Then you press the “Picture” option to get to the picture settings of your Grundig television.
4
In the settings of the picture menu you can decide not only the brightness and the contrast but also the modes. These are at the top of the selection.
5
The picture modes include energy saving, standard, lively, film, game and user.
Set up picture mode
In the picture settings you also have the choice of the picture mode. These suit different programs and purposes. Whether you’re a movie fan or a gamer, there’s something for everyone. We will introduce you to the picture modes in the further course and you choose what suits you.
Save energy
The energy-saving mode is particularly suitable for users who watch TV every day. In this way, you can save a lot of electricity in the long run. However, you should note that the brightness of your television set is regulated very far down as a result. If that seems too dark for you, you can switch to other modes.
default
The standard mode of your Grundig Smart TV is pre-programmed after purchase. This setting offers a good average of all options. If you don’t have any special requirements for your device, you can simply keep this setting. For those who are not satisfied with this, there are other options.
lively
In the “Vivid” mode you get a particularly colourful, strong and bright picture. You can use this feature when viewing photos on your TV screen. However, if you overdo the setting, the images will look very garish and artificial.
game mode
Game mode is particularly useful when gaming, as it allows you to get less latency (delay) on your TV screen. This means that there is no unnecessary jerking in the game, even with fast movements.
movie mode
The film mode is recommended for a cozy movie night at home, as it brings out the natural coloring of the picture. In this mode, however, the screen can appear very dark, which is why it is advisable to watch a film in a darkened room.
Do you want to buy a whole new Smart TV? Then we will show you here what you should consider when buying a television set. We also have the latest TV deals ready so you don’t miss out on the best discounts.
The sound settings of your TCL TV can be set up quickly and easily. You can then adjust the existing settings with your preferences and your program. What is important, we will explain to you in the further course.
Adjust sound settings
In order to get the best sound experience, it is recommended to adjust the sound settings of your TCL Smart TV to your viewing habits. Here you can specify, among other things, how your device is positioned in the room in order to match these settings as best as possible.
TV placement
This option allows you to specify where your TV is located exactly. This is particularly important in order to be able to place the sound of your loudspeakers correctly and reproduce them in the room.
Dolby Atmos
The Dolby Atmos technology gives you a realistic and impressive 3D sound. If your TCL television model also supports this audio format in combination with an improved Atmos surround sound, you can activate this setting to make your soundscape appear like in the cinema. Turning this setting off weakens the Atmos effect.
This is how you set up the sound settings
1
The first step is to click on the white gear on your remote control. This is how you get to the settings on the TV screen.
2
There you will see a list of setting options. These include picture, sound, system and expert settings. Here you click on the sound settings in the second place.
3
Under the sound settings you then have access to various options in the mode area. Here you will find Dynamic, Standard, Sport, Cinema, Music, Voice, Game and Sport.
Sound preset: sound mode
In the sound preferences, you can set the sound mode that offers specific viewing conditions. To do this, you go to the sound mode menu selection and decide which mode is the right one. We will show you what the exact differences are in the further course.
Dynamic
The dynamic mode ensures that the sound quality on your TCL television is automatically optimized. If you’re looking for dynamic sound quality, you’ve come to the right place.
default
The standard mode is particularly recommended for everyday use, as this setting is energy efficient and offers a middle ground of all available options. You will receive this basic setting immediately after purchasing your television. If you don’t have any special requirements for the sound settings, you can simply keep these factory settings.
movie theater
The cinema mode is particularly suitable for big home cinema fans. Here you can select the sound setting in order to get a bass boost from your loudspeakers when watching films and to immerse yourself completely in the film.
Music
If you use your smart TV to listen to a lot of music, the music mode is ideal. Particularly high and low pitches are emphasized and you can enjoy the sound experience on your TV to the fullest.
Agree
Your TCL television offers a voice mode that primarily emphasizes conversations. If you watch films and series with a lot of dialogue, you can get a very clear and distinct sound with this setting. In addition, the voices are not drowned out in loud music or sound effects.
Game
With the game mode you get virtual sound effects to optimize your gaming experience. This allows you to fully immerse yourself in your game on the TV and enjoy the perfectly tuned sound.
Sports
The sports mode in your sound settings gives you the feeling of experiencing the sports broadcast of your choice directly in the stadium. Here you get a particularly dynamic and exciting sound that lets you root for it.
Expert Settings
In the expert settings you will find even more options in the area of sound and audio playback. Here you can decide how the balancer or the auto volume control should be regulated. With these settings, you can connect your preferences and viewing habits even more precisely with your Smart TV and get a coordinated listening experience.
Tones menu
This setting allows you to set your remote control buttons to play a specific sound when you select different menu options.
balance
With the balancer you can set up how accurate the viewing position is to your smart TV. If this is not central to your screen, you can compensate for the connected speakers here and set them up individually. So you get the best sound when watching TV.
Auto Volume Control
The automatic volume control regulates the volume or the audio signal of your TV program for you. The ambient noise is compensated for and a noisy signal is also easier to hear and understand. In this way, you will no longer be disturbed by extremely loud advertisements or program transitions, since the volume level always remains pleasantly the same.
Are you looking for a new TV? Then we have put together a helpful buying guide for Smart TVs with important information for you. You should also not miss the latest TV deals to know all the bargains and offers.
Rumor has it that a game is coming to Xbox that will set the internet on fire and cause a lot of drama.
Xbox players are looking forward to January 18th with excitement, as the first Developer Direct livestream of the year will take place this Thursday.
The program includes news and introductions to the games Indiana Jones, Avowed, Senua’s Saga: Hellblade II and Ara: History Untold.
According to rumors, there could also be a shadow drop, i.e. the simultaneous announcement and release of a game during or close to the live stream.
In further rumors, Nick “Shpeshal Nick” Baker speaks in the current XboxEra podcast about a specific game that will be released for Xbox. This game is set to “set the internet on fire” and “cause plenty of drama” when it is revealed. But the information from his source is too hot for him to reveal anything in advance.
He did not say when this secret game would be revealed. So it’s just as possible at Developer Direct as it is sometime later this year.
What game could set the internet on fire so much if it was announced for Xbox?
Huawei introduced Celia in March, your own smart assistant to compete with Bixby, Google Assistant or Siri, among others. It is a proposal integrated into the latest devices of Chinese society and which is taking its first steps in this territory of the participants.
We say how to configure and use Celia Since then being a new assistant there may be several questions about how it works and how you can get the most out of it.
How to set up and use Celia
Celia is in the device settings themselves, in the “Huawei Assistant” section. Inside we will find a photo of “Hey Celia” and the list of possibilities. We will break them down one by one so that you can see how it can be configured and what can be done with this wizard.
The first section is “AI Voice”, the first thing we need to configure to start using Celia. Here we can configure voice activation and power button activation, as well as assistant languages. An important point is that one can click on the voice activation setting to reconfigure the wake-up phrase. This parameter helps the assistant to better recognize our voice.
Second, we have the “AI Objective” section. This is a Huawei function that allows you to scan QR codes, instant translations, purchases, count food calories, identify objects and other actions through the camera. This function cannot be configured and is built into the system., so you will find it in the camera interface.
AI Touch is the third function integrated into Celia and allows us identify the text on the screen with a gesture. If we tap with two fingers, for example, on an image, a search will be made for similar products, with purchase links to it, if available. This feature can be turned on or off at will and works system-wide, not just in Huawei’s official browser.
Another of the sections that we find in the ‘Huawei Assistant’ section is related to smart notifications. This is a series of notifications about app usage, weather, news, calendar events, etc. In our experience they are not bothersome, so that we can activate them without any problem. We can customize these notifications individually, as well as turn them off all at once.
AI Search is a feature that is not so related to Huawei Assistant, but it is part of Celia’s settings. This is a quick access to the search bar by swiping down on the main desktop. Here we can configure scope of research, adding or omitting applications and services that we want you to find or not.
Some of the functions that Celia can perform
Celia is still very limited, so we can’t ask for as much as Google Assistant or Siri. However, we have verified that some useful commands work.
Hey celia set an alarm
Hey Celia, search (what u wanna search) in the browser
Hey Celia, what’s the weather like today?
Hey Celia, translate (what you want to translate) into (language you want to translate)
Hey Celia, scan a code
Hey Celia, call (the person you wanna call)
Hey Celia, open the app (the app you want to open), it must be downloaded from the app gallery
Hey Celia, put on airplane mode
Hey Celia, turn on (or off) Bluetooth
Hey Celia, tell me how much is this product (the one you can make with the camera)
Hey celia open the settings
Hey celia turn on the sound
Hey Celia, create an event for tomorrow at 2 p.m.
Hi Celia, send a message to (the person you want to send the message to)
In these hours on social networks there are dangerously equivocal tweets of Hideki Naganuma, the composer known for his contribution to the music of Jet Set Radio.
These tweets have been deleted, but the people of the web are very shrewd and have managed to take screenshots. In a first post, Naganuma writes: “I found my girlfriend on Twitter. But she’s a teenager and I’m a 48-year-old funky uncle. What to do?“. I don’t pay. The composer quotes his own tweet stating:”Anyway, he will never tell me his real name“.
Naganuma’s Twitter account is famous for posting controversial tweets often, and the composer has always claimed to have a soft spot for young girls. Here, however, it ends up in the illegal, as even the composer himself declares that the girl is little more than a teenager. Also on the same day Naganuma declared that he had seen a film by Charlie Chaplin, an actor known not only for his comedy, but also for much more serious facts, one above all pedophilia. Surely it’s a coincidence, but these tweets a short time after each other still arouse suspicion.
Following these statements, many have stopped following the composer and some have given a peek at those who follow on Twitter: most of his followers are in fact sent to girls just over 18.
i was like haha ok weird joke meme grandpa then checked following list pic.twitter.com/PMyYxWGQ1V
– Toni #BlackLivesMatter (@ToniCodrea) October 19, 2020
Manage cookie settings
On ResetEra the users went wild: some believe it was just a joke but it went too far. We will probably never know, the fact remains that these tweets have been made, to prove what we cannot know.
As is the case in most video games, in Wolfenstein: Youngblood
Money – it’s called Silver Coins here – is quite scarce, which the developers want to ensure that you can’t just buy whatever you want, but rather be careful about which weapon upgrades you spend your hard-earned cash on . There are some interesting systems at play here, so be sure to read on, as I’ll explain how the modifiers work and what are the best set bonuses to use your guns to efficiently punch as many holes in ___s as possible can shoot.
How do weapon mods work in Wolfenstein: Youngblood?
In Wolfenstein: Youngblood
unlock weapon mods with Silver Coins found on corpses, in crates, or just lying around. To open the weapon mods menu (weapon mods screen), please press on PS4 touchpad
/ on the Xbox One the Options button
/ on the Nintendo Switch +
/ on PC Esc
.
This will take you to a menu where you will need to navigate to Weapons to see a list of the weapons currently available to you. You can then select your favorite weapon (or any other) to add the weapon to your Individual parts – shaft, receiver, magazine, etc. – can be seen. If you click on each part, you should see three different mods for each and in the lower right corner you should see how they change the stats of the selected weapon.
To unlock a weapon mod, you must pay the price in Silver Coins. You can then use them right away. Please note the make/brand of the weapon mod as this is relevant in the next section.
What do set bonuses do in Wolfenstein: Youngblood?
Any weapon mod in Wolfenstein Youngblood
belongs to one of three categories/brands: Nadel, Tempo or Bull. If you use three upgrades that belong to the same category/brand, you will receive the corresponding set bonus.
needle: Additional headshot damage.
tempo: Better/higher rate of fire.
bull: Improved damage.
Since each weapon has five parts, you can only get one set bonus per gun, but you can use the remaining two parts, which don’t have to be the same brand, to customize the weapon to your personal preference.
How does the mastery system work in Wolfenstein Youngblood?
This is pretty simple: to master a weapon, you need to use it to kill more enemies. You’ll progress through the Mastery Tree this way, increasing the percentage of damage you deal with your chosen weapon, up to a maximum level of 20. This means it’s worth focusing on using your Killing ’s favorite weapon to upgrade it. Personally, I prefer to use the Assault Rifle, which deals 24% bonus damage at Mastery Level 6.
How to improve weapon mods in Wolfenstein Youngblood?
Upgrading a weapon mod is easy and provides a solid stat boost for the firearm, making these upgrades worth investing in. However, you also need to unlock them, which aren’t that easy as some require you to reach level 25, but you should at least consider getting those upgrades. Make sure you have enough Silver Coins when the time comes so you can upgrade your arsenal.
The best Wolfenstein: Youngblood weapon mods
Assault Rifle – Nadel Semi-Auto Receiver
This mod turns the Bolt Action Rifle into a semi-automatic, obstacle-smashing beast, allowing you to shoot ___s through walls, cover, and other ___s. Combined with the x-ray scope, it’s downright deadly in the early game and perfect for taking down enemies from afar, but towards the end of the game you should switch to a full bull build to kill opponents efficiently.
Pistol – Tempo Auto Receiver
A powerful mod that turns the humble pistol into a rapid-fire weapon, fixing the rate of fire issue this weapon otherwise suffers from. In this improved state, the pistol can even be equipped with a silencer, combining high damage and stealth. The Burst Fire is a brutal barrage that melts armor, especially if you’re using two pistols at once – its double the trouble.
Flash Rifle – Taurus Heavy Receiver
I’ll be honest, I’m not exactly sure what the steel braid ammo does, but at high speeds this weapon turns ___s into putty, so it’s definitely worth upgrading, especially when paired with a Taurus Huge Damage set bonus .
Diesel Power Plant – Needle Napalm Injector
Let’s get to the point. Would you like to leave a burning puddle of napalm on the ground after each explosion? Then you need the Napalm Injector from Nadel. Combined with other bull parts, this is a dangerous weapon that deals tons of AoE damage after the initial mayhem. Who doesn’t love that?
Laserkraftwerk – Automatic Transformer
This mod turns your laser into an automatic, steady beam that literally disintegrates/disintegrates your enemies – you have to see it to believe it. Combined with bull damage mods, this weapon becomes a fantastic and fun tool that you can easily use to ruin any ’s day.
Wolfenstein: Youngblood – This Retro Wolf3D Easter Egg Allows You To Fight An Evil Wizard BJ Blazkowics (Guide)
Wolfenstein: Youngblood – How To Open All Kraftwerk Gates Special Weapons & Abilities Guide
How many spawn points are there in Sons of the Forest? Can you set where you want to spawn on the island and what about a day length setting? After familiarizing yourself with the basic features of the new survival game from Endnight Games, one or the other player may notice that you often start at a different spawn point when restarting. In this context, we asked ourselves how many starting points are there in the game and can you influence the spawn?
Change and set spawn point?
There are currently three spawn points in Sons of the Forest and these include a spawn at the very top of the beach, west of the island in the forest and in the middle of the island on the snow covered mountain.
beach spawn
forest spawn
mountain spawn
In the current version, the starting point is chosen randomly by the game and there is currently no way to influence this. If you are not satisfied with your spawn, you can either build your base somewhere else during the game or start a new game.
When you have spawned and done some work, the day is usually over and there are some dangers lurking for the player at night. If you want to get more done in a day, you can change and extend the length of the day in Sons of the Forest. To do this, you have to select the “Individual” level of difficulty when you start the game and then, under the “Environment” section, you can set the start time of year, the length of the season, and the length of the day, among other things.
The setting can also be changed later in the “GameSetupSaveData.json” file. The file for the savegame can be found under the path “C:/Users/%USERPROFILE%/AppData/LocalLow/Endnight/SonsOfTheForest/Saves/Singleplayer-Multiplayer/%ID%”.
Due to the changing times, we want our kids to be in the loop of what’s happening. That is why you recently purchased an iPhone for them. The problem is that they are now too excited, and they will dial anything to get anywhere.
That is where you need parental control solutions. Apple devices are now possessing inbuilt functions to activate such settings, but they can also be switched off at will. You need something that can tell you what the kids are doing without any tampering.
Are there such solutions? Yes, there are if you look in the right places. Let’s see how one of them works here, and it shows you.
Part 1: Using Spyier Parental Control on iPhones
There is a solution that you can use, and your kids will not see them. For you, everything will be arriving remotely right where you are. There is the internet these days, and that enables you to get results anywhere.
One of them is the Spyier solution that is applicable to any iOS device with version 7.0 or later. It’s so simple to use to the point of not needing installation. You only need the iCloud credentials of the phone to get started.
Since you don’t need to touch the phone to set it up, Spyier achieves 100% undetectability. That means your kids will never see it coming as you set up everything online. This solution has 35+ features. They are all shown to you on a dashboard that works with all browsers.
That allows you to log in anywhere if you have your login credentials and an internet connection. In most parental control apps, you may be forced to jailbreak the kid’s iPhone to get exclusive features.
That does not happen with Spyier since it already has cutting-edge technologies. That means it can fetch all the information you need without the need for the phone’s alteration. That also tells you that this app will be completely silent as it surveys your kids’ activities.
If you want to see all the dashboard features, get it from Spyier’s page on the website. We will highlight some of them here.
Part 2: Spyier Parental Control Features
All the contacts saved on the phone
The whole call log information
Sent and received iMessages, including the deleted ones
Real-time location and all the other visited places
Geofencing alerts
Social media activities
Installed applications
The whole browsing history
Keylogger reports
There is more to reveal when you subscribe to one of the plans and get an account in the process. As you monitor the kids’ activities, Spyier keeps your data from harm. It does that by syncing with the iPhone’s iCloud when you access your account.
So, if you are not checking on the updates, there is no data in your account. Here are the steps you need to get started with Spyier. Please note that it will only take about five minutes of your time.
Part 3: How to Use Spyier Parental Control on iPhones
Step 1: Go to the Spyier website and subscribe to one of the iOS category plans. As you do so, the website will ask for your email via a prompt window. Enter a working email and proceed to pay for your favorite plan.
Step 2: After the transaction, you will be taken to a confirmation page. It will have a username and a generated password to your account. You can change that at any time. Click on the button that says ‘Start Monitoring’ to proceed with the setup wizard.
Step 3: In the setup process, choose the iOS icon and feed the kids’ iPhone iCloud credentials. After that, click on start to get the dashboard.
Step 4: When the dashboard arrives, it will have all the features you need on the left menu. The phone’s summary will also be available.
To start checking on the activities, use the links in the menu.
Part 4: Why Choose Spyier as Your Parental Control Application?
This is a solution that has received millions of users across the globe. The advantages realized include the following:
No Phone Alteration
Spyier will never demand jailbreaking of any sort. Due to the cutting-edge technologies, it will quietly maneuver all the phone’s security measures. In the end, you will see everything remotely without alerting the kids.
Complete Stealth Mode
There is no installation needed here from subscription to getting the results. You will be working on Spyier’s website. That implies Spyier will never show its icon on the targeted phone. That is how you achieve complete stealth mode.
Real-Time Results
It doesn’t matter where you are. Spyier will show you every activity on the phone as soon as it is updated. You only need to login to get them.
Safeness
Spyier is one of the few apps that will keep you covered and protect you from online harm. It does not store the data collected if you are not logged in. Further, there is no malware introduced as you monitor the kids’ iPhone.
Remote Uninstallation
When it’s time to get rid of Spyier, you can do it via your control panel. There is a one-time uninstallation button for that. Once you click on it, the solution will be gone from the iPhone. To make sure it’s gone, dial *001# on the kid’s device.
Budget-Friendly and Fully Supported
Spyier offers you more than what you pay for. Therefore, it will always be worth the investments, not to mention there are no hidden fees. If you ever get any issues with the application, the support is there for you 24/7.
Conclusion
It’s essential to set up parental control applications if you are mostly away from your kids. It will help you capture their phone activities remotely and also take necessary precautions. The good thing about Spyier is that your kids will never notice it.
You only need their iCloud ID to get it done in five minutes at most.
